Airbag Module Reset After Accident (Crash Data Removal Service)

To reset the airbag light, it's essential to address the root cause first. If your vehicle was in an accident, the airbag control module stores crash data, which needs to be cleared. Sending the module to us for a reset will erase the stored crash data and restore the module to factory settings. This reset will turn off the airbag light once the module is correctly reinstalled.

B107E is associated with a fault in the airbag module, often due to a system malfunction or stored crash data. This code typically means the module needs to be reset or repaired to restore functionality. At L&D Solutions, we specialize in clearing such faults, ensuring your airbag system is ready for safe use.

B107E is associated with a fault in the airbag module, often due to a system malfunction or stored crash data. This code typically means the module needs to be reset or repaired to restore functionality. At L&D Solutions, we specialize in clearing such faults, ensuring your airbag system is ready for safe use.

Code B207F points to a malfunction in the Supplemental Restraint System (SRS) unit. This could happen due to sensor failures or crash data storage. Our reset services address this issue, clearing the error and restoring the module to factory settings.

B1015 refers to a faulty airbag control module. This may result from electrical failures or crash-related data. L&D Solutions can reset or repair the module, eliminating the error and avoiding costly replacements.

B1139 signals an internal error within the SRS module, which could compromise your vehicle’s safety system. Our team can diagnose and resolve the issue quickly, restoring the module’s functionality.

B1193 is a common airbag module fault that may require resetting. Whether it's due to crash data or internal errors, we provide a cost-effective solution to clear the code and restore your system.

B1206 indicates a fault in the Airbag Restraint Control Module (RCM), which is critical for airbag deployment. L&D Solutions can reset the module, ensuring your airbags are ready to protect you when needed.

B1342 indicates a serious SRS fault, often requiring professional intervention. Our reset services clear this fault and restore your airbag module, avoiding the need for expensive replacements.

Code B1620 involves an SRS error related to the airbag module or sensors. This suggests the system needs immediate attention. We can diagnose and resolve this issue to keep your vehicle’s safety system in top condition.

B1649 means a crash has been detected, and the airbag module has stored this data. Resetting the module is necessary to clear the crash codes and restore normal functionality. At L&D Solutions, we specialize in resetting crash data quickly and reliably.

DF194 often appears after an accident and signifies that the SRS airbag module has stored crash data. This prevents the airbag system from functioning correctly until it is reset. We offer quick turnaround times to clear this code and get you back on the road.

B1912 indicates a detected error in the airbag module. This issue might impact the effectiveness of your airbag system. Our team can address and resolve this error, restoring the system to its original specifications.

Cost-Effective: Save money by resetting your existing module instead of buying a new one. Quick Turnaround: Our reset process takes just 24-48 hours, plus shipping time. Reliability: We use OEM parts and ensure your module meets or exceeds factory safety standards. Comprehensive Service: We address all types of airbag modules, including single-stage, dual-stage, and triple-stage.

Removing the SRS airbag module involves several steps: 1. Disconnect the vehicle's battery to prevent electrical issues. 2. Locate the airbag control module, usually found under the center console, beneath the driver or passenger seat, or behind the dashboard. 3. Carefully disconnect the wiring harness connected to the module. 4. Unscrew and remove the module from its mounting bracket. 5. Follow the manufacturer’s guidelines for safe removal to avoid damage.

The cost of replacing an airbag module varies based on the vehicle's make and model. A new module can be expensive, ranging from $200 to $600 or more, excluding labor costs. Our reset service is a cost-effective alternative that ensures your existing module meets factory specifications, saving you money.